The Gold Reverse Osmosis (RO) system comes with:

• 10" Melted Spray (1um)

• 10" Premium KDF Cartridge

• 10" Pleated Filters (0.1um)

• 10" T33 Taste and odour Filter

• 200 GPD RO Membrane

• Mineral Injector

• Pressure Protection Valve

Specifications:

• Flow Rating: 200 Gallons Per Day (GPD) / 720 Litres Per Day (LPD)*

• Maximum Pressure: 6 bar / 90psi

• Maximum Operating Temperature: 4 - 45°C

• Country of Origin: Taiwan

• Warranty: 1 Years*

Gold Under-Counter Reverse Osmosis (RO) System

The Gold Reverse Osmosis (RO) system is one of the most complete under-the-counter systems available. It has the ability to eliminate up to 99.8% of harmful contaminants in water such as bacteria, viruses, lead, radium, chlorine, and arsenic. It makes use of multi-stage filtration technology.

With the RO system, you can rest assured that your drinking water is clean, clear, and healthy. 

The Gold Reverse Osmosis system can be used with numerous source waters including Municipal, Borehole Hole, River, Rain Water, Etc.

The Gold Reverse Osmosis System (RO) Includes the following:

• 6 Stage Reverse Osmosis system (with or without a Booster Pump)

• 200 GPD (Gallons Per Day) Reverse Osmosis Membrane

• Bacteria Pre-Filters Set (Sediment Filter (1 Micron), Premium KDF, & Ultra Filtration Cartridge)

• Mineral Injector

• Pressure Protection Valve 

Benefits:

• Maintenance is easy 

• Filtered water tastes and smells great.

• Promotes a healthy lifestyle

• Hidden away out of sight, only a chrome tap is visible

• Removes 99.8% of all contaminants in water

• Flushing of the membrane is done Automatically

• The low mineral content water is great for detoxifying your body

• The low mineral content water helps to prevent and dissolve kidney stones

• Delivers up to 700 Liters (200 Gallons) of filtered water per day

Gold Reverse Osmosis System Stages: 

• Stage 1: 10 Inch Sediment Filter (1 Micron) - Removes Particles, Dirt, Sand, Mud, Rust, and other large visible particles in the water. At 1 Micron You also start to capture some bacteria from the water.

• Stage 2: 10 Inch Premium KDF Cartridge - Absorbs Chlorine, Heavy Metals, and Organic molecules (bad odors) from the water. The KDF also inhibits the growth of bacteria on the cartridges, extending their life spans.

• Stage 3: 10 Inch 0.2 Micron Pleated Filtration Cartridge - 10" 0.2 Micron Water Filter replaced the Ultra Filtration Membrane as it dramatically reduces flush times making the system quicker to install and easier to maintain. This filter takes the bacteria load off of the RO membrane, helping to extend its lifespan.

• Stage 4: Reverse Osmosis Membrane - Removes bacteria, viruses, heavy metals, pesticides, herbicides, and reduces the mineral content (TDS) of water. 

• Stage 5: T33 taste and odor filter - Absorbs any organic molecules that come off of the RO membrane.

• Stage 6: Mineral Injector - Replaces some of the minerals lost during the Reverse Osmosis Process, changing the taste of the water.

Keep in mind:

• The Under the Counter RO requires a minimum of 3 bar water pressure to operate correctly, if your water pressure is low then you will need a system with a Booster Pump. Keep in mind that the Booster Pump will require electricity to operate. 

• The system has a water wastage rate of up to 4:1 due to constant flushing of the membrane, so for every 1 Liter of clean, filtered water produced, up to 4 liters will be used to flush the system.

• The RO System removes 99.8% of the minerals from water, including those that are good for you. However, a mineral injector can be added to the system to replace some of the minerals if this is of serious concern. Alternatively, another option is to look at using a Nano Filtration (NF) system, rather than a Reverse Osmosis (RO) system. The advantage of Nano Filtration (NF) over RO is only around 50% of the minerals are removed, while the rest are preserved by the system. 

• An important thing to remember before installing any filtration systems is to check which pipe under the counter is bringing the water to the tap and what size the source piping is. The standard household piping size is normally 1/2" (12.7mm) or 3/4" (19mm) thick. Some older houses have copper piping size instead of a newer system and in such cases, the special attachment will be required to install the RO to the copper piping. In order to ensure that you do not have to buy additional adapters due to the connections not matching the piping, please check what type and size your piping is before ordering a filtration system.

• A hole will have to be drilled into the counter or table where the RO tap will be placed.

• The filters all have a certain life span and must be replaced to ensure that the system works effectively.

• If the source water contains bacteria it may start to grow on the membrane and biofouling may occur.

• These units are designed for up to 200ppm water and will dramatically lose efficiency as the mineral content climbs.